Mobil 1™ ESP 5W-30

Advanced Full Synthetic Engine Oil

Mobil 1 ESP 5W-30

Mobil 1™ ESP 5W-30 advanced performance synthetic engine oil is a select member of Mobil 1™, the world's leading synthetic engine oil brand delivering our ultimate performance and protection.  Mobil 1™ ESP 5W-30 is engineered to deliver excellent all-round protection for Euro 6 and prior gasoline and diesel powered automobiles, and meets or exceeds the requirements of many leading car manufacturers.

Mobil 1 keeps your engine running like new!

 

Mobil 1 ESP 5W30* is suitable for Universal Top Up

*This recommendation applies for passenger cars using engine oils with viscosity grades ranging from xW-16 to xW-50. This recommendation is restricted to EU countries, UK, Norway, Switzerland and Lichtenstein.

Use in an emergency if the current oil is not available. Limit to 1 Liter max during a drain interval and conduct full drain with recommended oil when due. Refer to builder manual during warranty period.

Features and Benefits

Mobil 1 ESP 5W-30 is made with a proprietary blend of leading edge components formulated to help provide exceptional cleaning power and wear protection, and be fully compatible with the Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's).

 

Features

Advantages and Potential Benefits

Low Ash content

Helps to reduce particulate build-up in Diesel Particulate Filters

Low Sulphur and Phosphorous content

Helps to reduce poisoning of Gasoline Catalytic Converters

Active cleaning agents

Helps to reduce deposits and sludge build-up to enable clean and long engine life

Excellent thermal and oxidative stability

Helps to reduce oil aging allowing extended drain interval protection

Excellent low temperature capabilities

Quick cold weather starting and fast protection to help extend engine life

Meets industry latest LSPI requirements for gasoline direct injection turbocharged engines

Helps prevent engine breakdown resulting from pre-ignition occurrences at engine low speed and high torque operation

 

Applications

Mobil 1 ESP 5W-30 carries recommendations for a wide range of passenger cars, SUVs and light vans. It is designed for modern high efficiency gasoline, diesel and hybrid cars from Porsche, BMW, Volkswagen, Opel and Mercedes-Benz as well as for Japanese and Korean vehicles that specifically call for a SAE 5W-30 viscosity grade and any of the specifications the oil supports, allowing for extended oil change intervals where recommended by the manufacturer.

 

• Mobil 1 ESP 5W-30 is a low ash (mid SAPS) engine oil to help protect exhaust gas after-treatment systems designed to limit engine emissions. It fully meets or exceeds ACEA C3 industry standard and is suitable for the operation and protection of engines and after-treatment systems of vehicles calling for ACEA C2. However it only provides the fuel economy potential required by the C3 and not the C2 classification.

 

• Mobil 1 ESP 5W-30 meets or exceeds the requirements of 'API SP' industry standard therefore helping address LSPI (Low Speed Pre-Ignition) and making it a preferred choice for modern downsized direct injection turbocharged gasoline engines.

 

 • Mobil 1 ESP 5W-30 is especially suitable for extreme conditions where conventional oil often may not perform.

 

 • Mobil 1 ESP 5W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

Owner's manual should be consulted for recommended viscosity grade and specification.

 

Specifications and Approvals

 

This product has the following approvals:

BMW Longlife 04

MB-Approval 229.31

MB-Approval 229.51

MB-Approval 229.52

OV 040 1547 – D30

OV 040 1547 – G30

Porsche C30

VW 504 00

VW 507 00

 

This product is recommended for use in applications requiring:

FIAT 9.55535-S3

Recommended by ExxonMobil for applications requiring ACEA C2

 

This product meets or exceeds the requirements of:

API SJ

API SL

API SM

API SN

API SN PLUS

API SP

ACEA C3

 

Properties and Specifications

Property

 

Grade

SAE 5W-30

Pour Point, °C, ASTM D97

-42

Ash, Sulfated, mass%, ASTM D874

0.8

Flash Point, Cleveland Open Cup, °C, ASTM D92

234

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

67

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.5

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

11.9

Density @ 15.6 C, g/ml, ASTM D4052

0.851

Viscosity Index, ASTM D2270

175

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx