Mobil 1™ ESP X2 0W-20

ADVANCED FUEL ECONOMY, SHC SYNTHESE TECHNOLOGY ENGINE OIL

Mobil 1 ESP X2 0W-20

Mobil 1™ ESP x2 0W-20 is an advanced fully synthetic engine oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy* to keep your engine running like new. Mobil 1™ ESP x2 0W-20 is our latest technology combining durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1™ ESP x2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-20 viscosity grades.

 

* compared vs Mobil 1 ESP 5W-30.

 

Features and Benefits

 

Features

Advantages and Potential Benefits

Active cleaning agents

Helps to prevent the buildup of harmful deposits to enable long and clean engine life**

 

Provides outstanding engine cleanliness and sludge control

 

**Compared to vehicle manufacturer standard

Outstanding thermal and oxidation stability

Helps to reduce oil aging allowing extended drain interval protection

Enhanced frictional properties

Provides up to 4% fuel economy improvement when changing from a higher viscosity 5W-30 engine oil***

 

***Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity.

Excellent low temperature capabilities

Quick cold weather performance to help provide fast protection at start-up

Outstanding high temperature capabilities

Provided outstanding high temperature protection over the entire oil drain interval**

 

**Compared to vehicle manufacturer standard

Wear protection

Provides outstanding wear protection over the full oil drain interval**

 

**Compared to vehicle manufacturer standard

 

Applications

Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline, diesel and hybrid engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.

 

     •  Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.

 

     •  Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications

 

Specifications and Approvals

 

This product has the following approvals:

GM dexosD Licensed

MB-Approval 229.71

Porsche C20

VW 508 00

VW 509 00

 

This product meets or exceeds the requirements of:

API SL

ACEA C5

ACEA C6

API SN Engine Test Requirements

API SP ENGINE TEST REQUIREMENTS

 

Properties and Specifications

Property

 

Grade

SAE 0W-20

Viscosity Index, ASTM D2270

180

Density, 15.6C, g/cm3, ASTM D4052

0.842

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

8.0

Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683

2.6

Ash, Sulfated, mass%, ASTM D874

0.8

Flash Point, Cleveland Open Cup, °C, ASTM D92

230

Pour Point, °C, ASTM D97

-60

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx