Mobil™ Chassis Grease LBZ

Automotive Grease

MOBILGREASE XHP 222

Mobil Chassis Grease LBZ is a semi-fluid grease based on synthetic oils in the consistency group NLGI 00-000. It was specifically developed for central lubrication systems for commercial vehicles. The product contains anti-oxidants, corrosion inhibitors, extreme pressure and anti-wear additives. Due to its special formulation and semi-fluid consistency, Mobil Chassis Grease LBZ exhibits excellent flow even at very low temperatures and in long pipelines. The oil film adheres well and does not run off, even during stoppages. There is rapid on-flow to the greasing points. The good protection against rust also covers the use of ‘spreading’ salt and the related danger of rust on the lubrication points of the chassis. Mobil Chassis Grease LBZ is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.

 

Features and Benefits

FeaturesAdvantages and Potential Benefits
Good pumpability in centralised systems even at low temperaturesPotential to rationalise onto one product
Designed for centralised lubrication systemsReduced operating costs compared to greasing by hand due to lower maintenance costs and economic usage
Reduced wear under heavy or shock loading and vibration. Excellent anti-wear performance  Good equipment reliability and availability
Good protection against rust and corrosion and resistance to water washoutEnhanced equipment protection and good lubrication even in presence of water
Controlled oil releaseBalanced lubrication properties for longer service life

 

Applications

Recommended by ExxonMobil for use in:

Central lubrication systems using semi-fluid greases in commercial vehicles–50°C and 100°C 

The semi-fluid grease systems of the following manufacturers:

  • Willie Vogel AG, Berlin (to -25°C )
  • Mercedes Benz (Sheet 264.0 Semi-Fluid Greases).

 

Specifications and Approvals

Mobil Chassis Grease LBZ has the following builder approvals 
Mercedes BenzMB-Approval 264.0
MANMAN 283 Li-P 0-000

 

Typical Properties

Mobil Chassis Grease LBZ 
NLGI Grade00-000
Base Oil Viscosity @ 40°C, cSt, DIN EN ISO 310442
Thickener TypeLithium
ColourBeige-Brown transparent
Penetration, Worked, 25 ºC, ASTM D 217435-445
Dropping Point, D 2265, C›160
4-Ball Weld Load, N, DIN 51350-42200
Flow Pressure Test @ -35°C, hPa, DIN 5180550
Temperature range, continuous operation-40°C to +100°C

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.